Build Wheelie Bin Storage Cabinets
Wheelie bin storage cabinets – If you want to add new furniture for your kitchen or replace unattractive cabinets, you can build simple wooden cabinets in your own at home. Making your own cabinets that can save money on labor or contractor charges and using plywood makes the closet unit cheap. Set aside a weekend for the construction of your closets and leave them unfinished, paint or stain the plywood as desired before installing on the wall.
Measure the length across the wall where the wheelie bin storage cabinets will go. Subtract 1.5 inches from this length. Measure and cut four pieces of plywood 1 foot wide for this desired length. Then, measure and cut two boards 1 by 2 inches to the full length of the wall area. Also measure the height of the space for the wall cabinet. Measure and cut two pieces of plywood 1 foot wide by this exact height. Then, measure and cut two 1 by 2 inch boards at this height. Remove the four of the boards by 1 by 2 inches.
12 Photos Gallery of: Build Wheelie Bin Storage Cabinets
Build wheelie bin storage cabinets, lay one of the long plywood boards on the floor. Support of vertical height boards parallel to one another at each end of the length table. Make the corners flush. Insert three screws spaced evenly across the height boards and at each end of the length table to secure. Flip the unit over and place another board length between the ends of the height tables without warranty. Make the corners flush and place three screws at each end to secure.